Electric bikes are a great way to get around, but they’re not perfect.
They require regular maintenance in order to keep them running smoothly and safely. If you don’t take care of your electric bike properly, it can break down on you at any time–and then what? You’ll be stuck waiting for help or trying to push your bike home if it’s too heavy for you!
Electric bikes are also expensive investments that should last years longer than traditional bicycles. By taking care of these machines properly, you’ll be able to enjoy them for much longer than if they were neglected throughout their lifespan. Here are some tips on how best to maintain an electric bicycle:
Battery Care
Charge the battery. The first thing you should do when you get a new electric bike is charge the battery. This will help ensure that your bike will start up and run properly, as well as give you peace of mind that it’s ready when needed.
Store the battery in a dry place with moderate temperature (50-80 degrees F). Storing batteries at too high or low temperatures can damage them over time, so make sure yours stays somewhere comfortable! Check your battery regularly for signs of wear and tear like cracks around its terminals or corrosion on its casing–this could lead to an early demise if left unchecked!
Tire Pressure
Tire pressure is an important factor to consider when you’re maintaining your e-bike. If the tires are too low, they can wear out faster and be more prone to punctures. If they’re too high, there’s a risk that you’ll lose control of the bike or cause damage when riding over bumps in the road.
Lubrication
Lubrication is an important step to keep your bike running smoothly. There are many different types of lubricants, but they all serve the same purpose: keeping moving parts from grinding against each other. The most common type of lubricant is chain oil, which comes in a spray can and should be applied liberally to your chain every time you clean it. If you’re using a manual transmission, then apply some grease on the gears inside your hub motor housing.
Lubrication can be done at any time during maintenance; however, it’s best not to do it until after cleaning because this will prevent dirt from getting into places where it shouldn’t be (like between gears).
Cleaning
Clean the frame. The frame is the backbone of your e-bike, so it’s important to keep it clean and free from dirt. If you use an electric bike regularly, you’ll need to clean the frame more often than if you only ride occasionally.
Clean the chain with a brush or toothbrush after every ride. Dirt can build up on your chain very quickly if you don’t clean it regularly! This can cause problems with shifting gears and even damage other parts of your bike over time–so make sure that this part gets cleaned thoroughly every time before riding again!
Clean brakes using rubbing alcohol or brake cleaner spray (or both). Brakes are another thing that should be cleaned after each ride because they’re constantly being used while riding an electric bike; therefore they may become dirty much faster than other parts such as tires or pedals which aren’t used nearly as much during a single trip around town
Inspection
The first thing you should do is inspect the frame. If there are any cracks or dents in it, then this could be a sign that your bike may not be as safe to ride as you think it is. Next, inspect the brakes and make sure they’re working properly. It’s also important to check if there are any loose parts on your bike such as nuts or bolts because these can cause accidents if they fall off while riding. Finally, check out how well-oiled your chain looks before taking off on an adventure!
Drivetrain
Check the drivetrain. Drivetrains are the parts of your bike that move, such as the chain, gears and derailleurs. If you notice any rust or wear on these parts, it’s time to replace them.
Lubricate the drivetrain. You can use an oil specifically made for bikes or even WD-40 if you don’t have anything else handy! Just make sure not to get any on your tires or brakes (they’ll be slippery).
Replace broken parts with new ones instead of trying to fix them yourself–it’s better for safety reasons!
Brakes
Brakes are an important part of your bike, and they need to be adjusted properly to work effectively. If you have disc brakes, check the pads for wear and replace them if necessary. For rim brakes, make sure the pads are not rubbing against the rims or spokes–if they are replace them with new ones!
If you notice any issues with your brakes (such as squeaking or grinding), it’s time for maintenance: inspect all moving parts and tighten any bolts that may be loose; then lubricate everything with a good quality grease or oil before reassembling everything back together again in order to prevent further damage from occurring down the road due to lack of proper care being taken now during routine maintenance checks like these ones here today.”
Suspension
Suspension is an important part of your bike and should be checked regularly. The suspension system allows you to absorb bumps in the road, which can help prevent fatigue and injury. If your suspension is not working properly, it may be time for a tune-up or replacement.
Checking Your Suspension
The first step in checking your suspension is to ensure that all bolts are tight and there are no broken parts on either end of the fork or shock absorber assembly (if applicable). Forks should also be lubricated every year with fork oil so they move smoothly through their travel range without sticking or binding up at any point during use–this helps reduce wear on seals as well!
Adjusting Your Suspension
If everything looks good but still feels stiff when pedaling over bumps, try adjusting air pressure inside shocks/fork springs until they feel comfortable again. You’ll want this setting somewhere between soft enough so that bumps don’t cause jarring motions while riding but firm enough so there isn’t too much bobbing up & down while pedaling uphill climbs with weight added onto bike frame due